350-501 Practice Exams and Training Solutions for Certifications
Dumps Free Test Engine Player Verified Answers
Cisco 350-501 exam is a certification test designed for network engineers who specialize in service provider technologies. 350-501 exam tests the knowledge and skills required to implement and operate the core technologies used in service provider networks. It is also a requirement for obtaining the CCNP Service Provider certification.
Cisco 350-501 certification exam tests the candidate's knowledge and skills in various areas such as implementing core service provider network technologies, configuring and troubleshooting routing protocols, implementing MPLS Layer 3 VPNs, and implementing QoS. 350-501 exam also covers network automation, security, and virtualization technologies. Implementing and Operating Cisco Service Provider Network Core Technologies certification exam is designed to ensure that the candidate has a comprehensive understanding of service provider network technologies and is able to implement and operate these technologies in a real-world environment.
NEW QUESTION # 19
Refer to the exhibit.
Refer to the exhibit. A network support engineer for ASN 65502 receives a technical support ticket from a customer in ASN 65503 who reports that an eBGP session is down. The engineer determines that the peering failed after a recent change to the device at 192.168.26.2. EDGE-GW-1 must establish an eBGP session with the peering router 192.168.26.2. Which configuration establishes this session?
- A. configure terminal
router bgp 65502
address-family ipv4
neighbor 192.168.26.2 activate
end - B. configure terminal
no router bgp 65502
router bgp 65503
neighbor 192.168.26.2 remote-as 65503
address-family ipv4
neighbor 192.168.26.2 activate
end - C. configure terminal
router bgp 65502
no neighbor 192.168.26.2 remote-as 65503
neighbor 192.168.26.2 remote-as 65123
address-family ipv4
neighbor 192.168.26.2 activate
end - D. configure terminal
no router bgp 65502
router bgp 65503
neighbor 192.168.26.2 remote-as 65123
address-family ipv4
neighbor 192.168.26.2 activate
end
Answer: C
NEW QUESTION # 20
Drag and drop the technologies from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 21 
Refer to the exhibit. A network engineer is implementing a BGP protocol. Which effect of the local-as keyword in this configuration is true?
- A. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 and the VPNv4 address family.
- B. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 without additional configuration.
- C. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 without additional configuration.
- D. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 and the VPNv4 address family.
Answer: C
Explanation:
Section: Networking
NEW QUESTION # 22
Refer to the exhibit. While troubleshooting a connectivity issue on router R2, a network engineer with an employee id:3876.13.497 notices that although it detects three OSPF links from R1, the OSPF prefixes are missing from the routing table. What is the reason for the problem?
- A. The serial interfaces have different MTUs
- B. The R2 Serial 1/0 interface is configured with an IP address, but the R1 Serial R1 Serial 1/0 interface in unnumbered.
- C. Both loopback interfaces on R1 are configured as stub
- D. The subnet masks on the serial interfaces are mismatched.
Answer: B
NEW QUESTION # 23
Refer to the exhibit.
ASN 64501 currently reaches the networks under the 10.0.0.0/8 prefix via the North_B router, which is a slow backup link. The administrator of ASN 64502 wants traffic from ASN 64501 to 10.0.0.0/8 to travel via the primary link North_A. Which change to the network configuration accomplishes this task?
- A. Advertise the 10.0.0.0/8 prefix through North_B and specific subnets through North_A
- B. Set a lower MED between North_B and South_B
- C. Set a Lower Weight value for incoming traffic on North_A
- D. Set a higher local preference between North_A and South_A
Answer: B
NEW QUESTION # 24
How can a network administrator secure rest APIs?
- A. They can ensure that user sessions are authenticated using TACACS+ only.
- B. They can allow read and write privileges to all users.
- C. They can have a general administrator login for multiple users to access that has command entries logged.
- D. They can authenticate user sessions and provide the appropriate privilege level.
Answer: D
Explanation:
Section: Automation and Assurance
Explanation/Reference:
NEW QUESTION # 25
An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate.
Which configuration accomplishes these objectives?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Section: Architecture
NEW QUESTION # 26 
Refer to the exhibit Which effect of this configuration is true?
- A. The two routers fail to form a neighbor relationship because their system IDs are different.
- B. The two routers fail to form a neighbor relationship because the authentication configuration is missing.
- C. The two routers fail to form a neighbor relationship because they have different IS-IS area types.
- D. The two routers successfully form a neighbor relationship.
Answer: D
Explanation:
Section: Networking
NEW QUESTION # 27
Refer to the exhibit:
What is the URL used for with REST API?
- A. It is used to contact a URL filter to determine the efficacy of a web address
- B. It is used to initiate an FTP session to save a running configuration of a device.
- C. It is used to send a message to the APIC to perform an operation on a managed object or class operator
- D. It is used to send a TACACS+ authentication request to a server
Answer: C
NEW QUESTION # 28
Refer to the exhibit.
Refer to the exhibit. The application server in the data center hosts voice, video, and data applications over the internet. The data applications run more slowly than the voice and video applications. To ensure that all applications run smoothly, the service provider decided to implement a QoS policy on router PER 2 to apply traffic shaping. Which two actions must an engineer take to implement the task? (Choose two.)
- A. Set a threshold to discard excess traffic.
- B. Enable packet remarking for priority traffic.
- C. Configure the scheduling function to handle delayed packets.
- D. Configure a queue to buffer excess traffic.
- E. Set the token value for secondary traffic.
Answer: C
NEW QUESTION # 29
Refer to the exhibit. An engineer is reviewing the BGP configuration. Which router must be advertised to
10.10.10.1?
Refer to the exhibit. An engineer is reviewing the BGP configuration.
Which routes must be advertised to 10.10.10.1
- A. Local routes are denied, and routes from other ASNs are permitted.
- B. All routes whether local or from other ASNs are permitted.
- C. Local routes are permitted, and routes from other ASNs are denied.
- D. All routes whether local or from other ASNs are denied.
Answer: B
NEW QUESTION # 30
Refer to the exhibit.
Refer to the exhibit. A network engineer is implementing multicast services on CPE-1 and CPE-2. CPE-1 must be configured as the preferred IGMP querier for the LAN segment. PIM-SM must be implemented on the LAN interfaces with an IGMP version that supports (*, G) joins only. Which configurations must the engineer implement on CPE-1 and CPE-2?
- A. On CPE-1:
interface GigabitEthernet0/1
ip address 10.0.12.129 255.255.255.128
ip pim sparse-mode
ip igmp version 3
On CPE-2:
interface GigabitEthernet0/1
ip address 10.0.12.130 255.255.255.128
ip pim sparse-mode
ip igmp version 3 - B. On CPE-1:
interface GigabitEthernet0/1
ip address 10.0.12.130 255.255.255.128
ip pim sparse-mode
ip igmp version 3
On CPE-2:
interface GigabitEthernet0/1
ip address 10.0.12.129 255.255.255. 128
ip pim sparse-mode
ip igmp version 3 - C. On CPE-1:
interface GigabitEthernet0/1
ip address 10.0.12.129 255.255.255.128
ip pim sparse-mode
ip igmp version 2
On CPE-2:
interface GigabitEthernet0/1
ip address 10.0.12.130 255.255.255.128
ip pim sparse-mode
ip igmp version 2 - D. On CPE-1:
interface GigabitEthernet0/1
ip address 10.0.12.130 255.255.255.128
ip pim sparse-mode
ip igmp version 2
On CPE-2:
interface GigabitEthernet0/1
ip address 10.0.12.129 255.255.255.128
ip pim sparse-mode
ip igmp version 2
Answer: C
NEW QUESTION # 31
Drag and Drop Question
Drag and drop the NAT64 descriptions from the left onto the correct NAT64 types on the right.
Answer:
Explanation:
NEW QUESTION # 32
Refer to the exhibit.
If RC is a stub router, which entry must be injected so that it will send traffic outside the OSPF domain?
- A. more specific route
- B. default route
- C. virtual link between RB and RC
- D. sham link
Answer: A
NEW QUESTION # 33 
Refer to the exhibit. A network engineer is implementing a standard customer route-policy on router ASBR1 with these requirements:
* It must accept only customer-assigned prefixes.
* It must preserve customer-advertised BGP communities.
* It must set the local-preference to 110 for all prefixes.
* It must attach the ORIGINATION-PE and LOCAL-CITY communities to all accepted prefixes.
Which route policy must the engineer implement on ASBR1 to satisfy the requirements?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Section: Networking
NEW QUESTION # 34
......
Career Bonuses
Obtaining the CCIE Service Provider or CCNP Service Provider certifications will allow you to take a prestigious position with a decent salary. Thus, the certified professionals can choose between various job roles, including a CCIE Trainer, a Customer Success Specialist, a Network Administrator, a Hardware & Network Technician, a Subject Matter Expert, a SCADA Network Specialist, and a Network Engineer among others. As for the average salary, you can expect to earn about $100,000-$160,000 per year. The amount of income will depend on your title, working experience, and related tasks.
Q&As with Explanations Verified & Correct Answers: https://freetorrent.dumpsmaterials.com/350-501-real-torrent.html
