2023 Updated Verified Pass CQE Study Guides & Best Courses
Ultimate Guide to the CQE - Latest Edition Available Now
In order to prepare for the ASQ CQE exam, candidates can utilize a variety of study materials, including books, online courses, and practice exams. ASQ also offers training courses and workshops to help candidates prepare for the exam. With the right preparation and dedication, candidates can successfully pass the ASQ CQE exam and earn a valuable certification in the field of quality engineering.
ASQ CQE Exam is a computer-based exam consisting of 175 multiple-choice questions. CQE exam is four hours long and is designed to test the candidate's knowledge and understanding of quality engineering concepts and practices. CQE exam is graded on a scale of 1 to 150, with a passing score of 110 or higher.
NEW QUESTION # 93
The failure rate model above is used to show a typical relationship of many parts between their failure rate and the time in service. The reliability function for period "B" is BEST represented by
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: A
NEW QUESTION # 94
The steeper the OC-curve, the
- A. The smaller the sample size.
- B. Less protection for both producer and consumer.
- C. More protection for both producer and consumer.
- D. The lower the AQL.
Answer: C
NEW QUESTION # 95
Which of the following are the MOST logical reasons for providing source inspection?
I. The supplier has consistently shown poor out-going quality.
II. The key inspection points are hidden after assembly at the suppliers' plant.
III. The supplier requests the inspection to save them potential shipping expenses.
IV. The criticality of the product warrants it.
- A. II and IV only
- B. II, III and IV only
- C. I, II and IV only
- D. I, II, III and IV
Answer: D
NEW QUESTION # 96
Which of the following are likely to be positive actions in obtaining a supplier's commitment to quality improvement?
I. Involving the supplier early in the product development stage.
II. Partially reimbursing the supplier, when the product is rejected.
III. Establishing a firm schedule of required product quantities and dates.
IV. Providing meaningful and timely quality performance feedback.
- A. I, II and IV only
- B. I, III and IV only
- C. I and IV only
- D. I, II, III and IV
Answer: B
NEW QUESTION # 97
For TQM success, what structure sequence should be followed?
. Develop a quality policy. . Establish a quality council. . Establish strategic quality goals.
. Train for internal audits.
- A. I,II,III,IV
- B. II,I,III,IV
- C. III,II,I,IV
- D. II,III,I,IV
Answer: B
NEW QUESTION # 98
Normally, complaint data for both a product or service organization should provide
- A. The appropriate corrective action to take.
- B. The total quality costs for the organization.
- C. The degree or extent of customers dissatisfaction.
- D. An indication of the organizational areas creating the most problems.
Answer: C
NEW QUESTION # 99
An audit will be viewed as a constructive service to the function which is audited when it
- A. Is general enough to permit managerial intervention.
- B. Proposes corrective action for each item uncovered.
- C. Furnishes enough detailed facts so the necessary action can be determined.
- D. Is conducted by nontechnical auditors.
Answer: C
NEW QUESTION # 100
Which of the following are the MOST logical reasons for providing source inspection?
I. The supplier has consistently shown poor out-going quality.
II. The key inspection points are hidden after assembly at the suppliers' plant.
III. The supplier requests the inspection to save them potential shipping expenses.
IV. The criticality of the product warrants it.
- A. II and IV only
- B. II, III and IV only
- C. I, II and IV only
- D. I, II, III and IV
Answer: D
Explanation:
Explanation
NEW QUESTION # 101
Which of the following is NOT a method for customer service data collection?
- A. Internal surveys.
- B. Complaint analysis.
- C. Customer visits.
- D. Customer surveys.
Answer: A
NEW QUESTION # 102
Maintainability is
- A. Performing adequate maintenance on a system.
- B. Maintaining a machine in satisfactory working condition.
- C. Probability of survival of a system for a given period of time.
- D. The probability of a system being restored to functional operation within a given period of time.
Answer: D
NEW QUESTION # 103
The weight of paint cans is considered
- A. Continuous data.
- B. Discrete data.
- C. Random data.
- D. Probability data.
Answer: A
NEW QUESTION # 104
Which of the following items is the MOST important consideration when selecting an audit team member?
- A. Being competent in auditing techniques.
- B. Being familiar with the organization that will be audited.
- C. Being competent in many quality control techniques.
- D. Having technical knowledge of the area being audited.
Answer: A
NEW QUESTION # 105
As a commonly used problem solving technique, which of the following would be the BEST application of a Pareto chart?
. To determine when to make proactive adjustments to a process.
. To differentiate between major and minor problem areas.
. To gather data and to design experimental controlled changes.
. To evaluate the results of other problem solving techniques upon the product or service.
- A. IIandIVonly
- B. IIandIIIonly
- C. I andIIonly
- D. I,II,IIIandIV
Answer: A
NEW QUESTION # 106
The descriptive name for a fishbone or Ishikawa diagram is which of the following?
- A. Scatter diagram.
- B. Pareto diagram.
- C. Cause and effect diagrams.
- D. Flow charts.
Answer: C
NEW QUESTION # 107
A typical use for the optical comparator would be to measure
- A. Diameters of internal grooves.
- B. Depth of holes.
- C. Surface finish.
- D. Contours.
Answer: D
NEW QUESTION # 108
A pre-award evaluation of a supplier's quality system capability should NOT include consideration of
- A. The supplier's product-quality history.
- B. The supplier's geographical location.
- C. The supplier's skills in quality control techniques.
- D. The supplier's implementation of quality manual procedures.
Answer: B
NEW QUESTION # 109
Which of the following actions or techniques is MOST useful in determining the original fundamental cause of a product or process nonconformance?
- A. Pareto analysis.
- B. Preventive action.
- C. Continuous improvement.
- D. Root cause analysis.
Answer: D
NEW QUESTION # 110
A company is planning to completely change its employee performance, appraisal and reward system.
Which of the following is NOT viable for consideration in the new system?
- A. Integrating subordinate, peer, customer, and self-evaluations with supervisory ratings.
- B. Requiring less frequent performance reviews, but utilizing many rating categories.
- C. Using continuous improvement, quality and customer satisfaction as key criteria.
- D. Requiring work team or group evaluations that are equal in emphasis to individual evaluations.
Answer: B
NEW QUESTION # 111
To be effective, a corrective and preventive action system must have
- A. Approved of the QC department.
- B. A material review board.
- C. A method for identifying nonconformities.
- D. Top management support.
Answer: C
NEW QUESTION # 112
In the planning of a new major manufacturing program, the greatest quality effort should be put logically in
- A. Inspection of product.
- B. Nonconformance to specifications.
- C. Prevention of occurrence of substandard quality.
- D. Nondestructive testing equipment.
Answer: C
NEW QUESTION # 113
Compute the upper control limit for an s chart, based on a sample size of 10, if the process is in control with a mean of 40 and a sample standard deviation of 7.
- A. 15.7
- B. 0
- C. 11.7
- D. 13.3
Answer: C
NEW QUESTION # 114
What does a corrective action do to prevent an existing noncomformity, defect or undesirable situation from recurring?
- A. Takes action against it.
- B. Eliminates it.
- C. Minimizes it.
- D. Takes repercussions against those responsible.
Answer: B
NEW QUESTION # 115
One-way analysis of variance is MOST similar in its objectives to
- A. A chi-square test for independence.
- B. A test of a population mean.
- C. A test for equality of two population means.
- D. A test for equality of two sample proportions.
Answer: C
NEW QUESTION # 116
You have been asked to sample a lot of 500 units from vendor whose past quality has been about 2% defective. A sample of 40 pieces is drawn from the lot and you have been told to reject the lot if you find two or more parts defective. What is the probability of finding two or more parts defective?
- A. 0.047
- B. 0.191
- C. 0.809
- D. 0.953
Answer: B
NEW QUESTION # 117
Any group, designing a quality information system (QIS) to collect product data, must consider which of the following items?
. How the results will be used.
. The frequency that results must be reported.
. The allowable data error variation.
- A. I,IIandIII
- B. IIandIIIonly
- C. IIonly
- D. IandIIonly
Answer: A
NEW QUESTION # 118
......
Dumps MoneyBack Guarantee - CQE Dumps Approved Dumps: https://freetorrent.dumpsmaterials.com/CQE-real-torrent.html
